TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 492 of 1060

TM 5-5420-202-20-3

FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (LEFT) (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURES

PAGE

Removal

10-321

Installation

10-324

TOOLS:

Flat-tip screwdriver

Slip-joint pliers

Diagonal cutting pliers

1/2 in. socket with 1/2 in. drive

Putty knife

Ratchet with 1/2 in. drive

Torque wrench with 1/2 in. drive (0-175 lb-ft)

SUPPLIES:

Dry cleaning solvent (Item 55, Appendix D)

Gaskets

Lint-free cloth (Item 12, Appendix D)

Gloves (Item 69, Appendix D)

Lockwire (Item 61, Appendix D)

Goggles (Item 70, Appendix D)

Lockwashers (8 required)

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2).

Drain left fuel tank (TM 5-5420-202-10)

REMOVAL:

1.

Remove electrical connector (A) from capacitor and housing electrical connector (B) by

pulling out.

2.

Using diagonal cutting pliers, remove lockwire (C) securing four screws (D) on capacitor

and housing (E).

3.

Using screwdriver, remove four screws (D),

flat washers (F), and lockwasher (G) from

capacitor and housing (E).

4.

Slowly separate capacitor and housing (E)

from cover (H). Capacitor and housing (E)

are connected to cover (H) with an electrical

lead.

TA249263

Go on to Sheet 2

10-321