TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 488 of 1060

TM 5-5420-202-20-3

FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (RIGHT)

(Sheet 2 of 5)

3.

Lift cover (B) with fuel pump (D) from tank.

4.

Using fingers, disconnect cable (E) from fuel pump (D) by pulling out.

5.

Rest cover (B) in original position

on fuel tank.

10 .

11 .

12 .

13 .

Go

6.

7.

8.

9.

Using screwdriver, remove screw (M),

washer (N), electrical lead (P) and

gasket (Q) from adapter (R). Discard

gasket.

Using cutting pliers, remove lockwire

(S) from screws (T).

Using socket, remove eight screws

and washers (T).

Remove cover

tank. Discard

(U) and gasket (V) from fuel

gasket.

on to Sheet 3

Using fingers, disconnect cable (F) from

electrical connector (G) by pulling out.

Using diagonal pliers, remove lockwire (H)

from four screws (J).

Using screwdriver, remove four screws

and washers (J) holding housing (K) to

cover (L).

Slowly separate capacitor and housing

(K) from cover (L). Capacitor and

housing (K) are connected to cover (L)

with an electrical lead.

TA249258

10-317