TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 479 of 1060

TM 5-5420-202-20-3

ELECTRICAL WIRING HARNESS AND CABLE CONNECTOR REPAIR (Sheet 11 of 18)

Female Plug Repair (Sheet 1 of 3)

TOOLS:

Electrical connector repair tool kit

Soldering gun

Slip joint pliers with plastic jaw inserts

Diagonal cutting pliers

SUPPLIES:

Silicone compound (Item 32, Appendix D)

Electrician’s tape (Item 59, Appendix D)

Jumper wire

PRELIMINARY PROCEDURES:

Disconnect three battery ground straps (page 10-268)

1.

2.

Manually remove grommet

from plug assembly (B).

Slide grommet retaining nut

along cable (C).

Loosen or

Disconnec

remove cable clamps as required

t connectors at each end of affected cable

retaining nut (A)

(A) back

3.

Using slip joint pliers, work

grommet (D) back and forth and

out of plug assembly (B).

Go on to Sheet 2

10-308

4.

Using remover, push contact (E)

with damaged wire out of back

of plug assembly (B).

TA249249