TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 630 of 1060

TM 5-5420-202-20-3

UNIVERSAL JOINT REPAIR (Sheet 2 of 2)

9.

10.

Turn universal joint over. Repeat steps 5 thru 8 to remove second spider assembly

from coupling plate.

Replace coupling plate and each spider in its entirety if any component within an

assembly is cracked or broken.

ASSEMBLY:

10. Using lubricating

assembly.

11.

Install universal

oil, oil universal joint

joint (page 12-1

1.

2.

3.

4.

5.

6.

7.

8.

9.

Using wrench,

if removed.

replace lubrication fitting (A),

Place coupling plate (B) and either spider

assembly (C) in vise.

Place spider assembly (C) into position on

coupling plate (B).

Using hammer, gently tap spider assembly (C)

and coupling plate (B) into snug fit.

Using hinge handle, install four screws (D).

Using torque wrench, tighten screws (D) to

115-130 lb-ft. (155-175

Turn universal joint over. Repeat steps 1

through 6.

Place universal joint on end.

Using slip joint pliers, attach locking wire (E)

to each two adjacent screws (D) (page C-34).

End of Task

Change 4

12-23