TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 621 of 1060

TM 5-5420-202-20-3

UNIVERSAL JOINT REPLACEMENT

REMOVAL:

1.

2.

3.

4.

5.

6.

7.

8.

NOTE

Turn quick-disconnect clamp until

in working position.

Using cutting pliers, cut lockwire (A)

Using extension and 3/4 inch socket,

screw (B).

Open quick-disconnect clamp (C).

Remove quick-disconnect clamp (C).

(Sheet 2 of 7)

it is

remove

Check quick-disconnect clamp (C) for cracks,

breaks, and sprung hinge. Replace if

necessary.

Place large crowbar (D) in position to

support final drive flange (G).

While holding down on large crowbar (D),

use pinch bar (E) to pry final drive adapter

assembly (F) until it comes loose from final

drive flange (G).

CAUTION

Use rope capable of picking

holding at least 92 pounds.

up and

Attach rope (H) loosely to universal joint (J)

Go on to Sheet 3

12-16

Change 3