TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 615 of 1060

TM 5-5420-202-20-3

FINAL DRIVE STUD REPLACEMENT (Sheet 1 of 2)

TOOLS:

1-1/2 in. open end wrench

Hammer

Pipe wrench (2 in. opening)

Ruler

SUPPLIES:

Primer (Item 49, Appendix D)

Sealing compound (Item 26, Appendix D)

Two small brushes (Item 10, Appendix D)

Penetrating oil (Item 43, Appendix D)

PRELIMINARY PROCEDURE:

Remove final drive (page 12-2)

REMOVAL:

NOTE

1.

If stud is bent or cracked, go to step

1.

If stud has damaged threads or

NOTE

broken off below threads, go to step 2.

Studs come in three different lengths.

If stud is broken off, flush with final

Make sure you order the right size.

drive housing,

notify support main-

tenance.

Apply penetrating oil to base of stud (A).

Thread two hex nuts on stud (B) and jam the

nuts.

Sharply tap head of stud (B) several

times with hammer. Turn lower nut (C) to

remove stud (B).

2.

Apply penetrating oil to base of stud (A).

Sharply tap head of stud (B) with hammer.

Using pipe wrench (F), remove broken stud

(B).

TA249378

Go on to Sheet 2

12-10