TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 610 of 1060

LEFT AND RIGHT FINAL DRIVE REPLACEMENT

TM 5-5420-202-20-3

(Sheet 4 of 4)

16. Using 3/16 inch allen wrench, remove plug

(K) from left final drive.

17. Using adjustable wrench, install tee (L) into

left final drive where plug (K) was.

Left Side

18.

19.

20.

21.

22.

23.

24.

25.

26.

Using fingers connect tube assembly (M) and tubing (J) to tee (L).

Using torque wrench and crowfoot wrench, tighten tubing (J) nut 75-85 lb-in (8.4-9.5 N·m).

Using torque wrench and crowfoot wrench, tighten tubing assembly (M) nut 75-85 lb-in

(8.4-9.5 N·m).

Install final drive air pressure valve (page 12-6).

Install track drive sprocket (page 14-77).

Install adapter assembly (page 12-8).

Install powerplant guides (page 6-3).

Fill final drive with oil (LO 5-5420-202-12).

Drive vehicle to perform operational check (TM 5-5420-202-10).

End of Task

Change 4

12-5