TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 647 of 1060

TM 5-5420-202-20-3

BRAKE MASTER CYLINDER REPLACEMENT (Sheet 5 of 9)

CLEANING AND INSPECTION:

1.

Inspect stoplight switch (A). Replace

if unserviceable.

Cleaning agent specified is flammable.

Use only in well ventilated areas.

Keep away from flames, sparks, or heat. Do not smoke while using. Prevent

2.

3.

4.

contact with eyes, mouth, and/or skin.

cleaning procedures.

Using clean rags and dry cleaning solvent,

clean all parts which have been removed.

Inspect elbow (B), brake tube assembly (C),

tube reducers (D), line tube nuts (E),

and push rod (F) for damage, bad threads,

cracks, or excessive wear. Replace if

unserviceable.

Using flat-tip screwdriver, clean groove (G)

on push rod (F). Remove all old adhesive.

Wear rubber gloves when perform ing

Go on to Sheet 6

13-6

TA249396