TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 640 of 1060

TM 5-5420-202-20-3

FINAL DRIVE VENTING SYSTEM REPLACEMENT (Sheet 10 of 10)

NOTE

If new tube (T) is being installed, obtain (from supply) two tube

nuts (MS51823) and two sleeves (MS51825) and install onto

new tube (T).

20. Using fingers, connect tube assembly (T) to elbow (S) and tee (R).

21. Using torque wrench and 9/16 inch crowfoot, tighten tube assembly (T) nuts to elbow (S) and tee (R)

to 75-85 lb-in (8.495 N

22. Install four clamps (U) onto tube assembly (T).

23. Using 7/16 inch wrench, install and tighten screws (V) and new lockwashers (W) securing clamps (U

and X).

24. Install powerplant (page 5-14).

End of Task

Change 4

12-33/(12-34 blank)