TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 659 of 1060

TM 5-5420-202-2 -3

BRAKE PEDAL ADJUSTMENT (Sheet 2 of 2)

2.

Using two 11/16 inch wrenches loosen jam nuts (C) and (D), using 5/8 inch wrench adjust

tie rod (E) for a reading of 175 to 250 psi on pressure gage (F). Tighten jamnuts (C) and (D).

3.

Remove locating pin installed in step 1.

4.

Depress brake pedal until brake pedal cam face just contacts roller surface (G).

5.

Check pressure gage (F) for 0 psi reading.

6. Using 9/16 inch wrench, loosen jamnut (H).

Using 3/8 inch wrench, adjust screw (J) until screw (J) just makes contact with brake

7.

lever (K). Tighten jamnut (H).

8.

Set transmission shift lever to

“P” park position (TM 5-5420-202-10).

9.

Remove blocks from vehicle tracks (TM 5-5420-202-10).

End of Task

13-18

TA249408