TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 665 of 1060

TM 5-5420-202-20-3

MASTER BRAKE CYLINDER MOUNTING BRACKET-TIE ROD, PUSH ROD, CLEVIS, AND

BOOT REPLACEMENT (Sheet 6 of 9)

CLEANING AND INSPECTION:

Dry cleaning solvent P-D-680 is

toxic

WARNING

and flammable.

To prevent personal injury, wear

protective goggles and gloves and use only in a well-ventilated area. Avoid contact with skin,

—

eyes, and clothes and don’t breathe vapors.

Do not use near open flame or excessive heat. The

flash point for Type #1 Dry Cleaning Solvent is 100°F (38°C) and for Type #2 is 138°F (50°C).

If you become dizzy while using cleaning solvent, get fresh air immediately and get medical aid.

If contact with eyes is made, wash your eyes with water and get medical aid immediately.

1.

Using

2.

Using

dry cleaning solvlent and rags, clean and dry all parts.

steel wool, remove remaining adhesive from groove (AC) on push rod (X).

3.

Inspect all parts for damage or excessive wear. Replace if unserviceable.

Go on to Sheet 7

13-24