TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 671 of 1060

TM 5-5420-202-20-3

MASTER CYLINDER AND PEDAL LEVER MOUNT ASSEMBLY REPLACEMENT (Sheet 3 of 3)

2.

Inspect the mount (A) for cracks or broken alinement pins. Replace if unserviceable.

INSTALLATION:

1.

Place mount (A) behind column (B) with

holes alined.

2.

Place two washers (C) on screws (D) and

install through rear of mount (A).

3.

Use 9/16 inch wrench to hold screws (D).

Using socket and extension, install two

lockwashers (E) and nuts (F).

4.

5.

6.

7.

8.

Using socket and extension, install three washers (G), lockwashers (H), and screws (J).

Install master brake cylinder mounting bracket (page 13-25).

Remove web straps or rope securing master cylinder.

Install brake foot pedal assembly (page 13-14).

Place shift lever in P (park) position and remove blocks from tracks (TM 5-5420-202-10).

End of Task

13-30