MASTER CYLINDER AND PEDAL LEVER MOUNT ASSEMBLY REPLACEMENT
TM 5-5420-202-20-3
(Sheet 2 of 3)
REMOVAL:
1.
Use 9/16 inch wrench to hold two screws (A) and two washers (B).
2.
Using socket and extension,
(A) and washers (B).
3.
Using socket and extension,
CLEANING AND INSPECTION:
remove two nuts (C) and lockwashers (D).
remove three screws (E), lockwashers (F),
Remove two screws
and washers (G).
WARNING
Cleaning agent specified is flammable.
Use only in well ventilated areas.
Keep away from flames, sparks, or heat. Do not smoke while using. Prevent
contact with eyes, mouth, and/or skin. Wear rubber gloves when performing
cleaning procedures.
1.
Using drycleaning solvent and
Go on to Sheet 3
rags, clean and dry mount (H).
TA249418
13-29