TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 673 of 1060

TM 5-5420-202-20-3

BRAKE SWITCH (STOPLIGHT) REPLACEMENT (Sheet 2 of 4)

REMOVAL:

WARNING

Cleaning agent specified is flammable. Use only in well ventilated areas. Keep

away from flames, sparks, or heat. Do not smoke while using. Prevent contact

with eyes, mouth, and/or skin. Wear rubber gloves when performing cleaning

procedures.

1.

2.

3.

4-.

5.

6.

Using drycleaning solvent and rags, clean

master cylinder (A), elbow (B), stoplight

switch (C), electrical connector (D), and

general area.

Using hands, place funnel and container

under elbow (B) to catch brake fluid.

Using fingers, disconnect electrical

connector (D) from stoplight switch

(C).

Using pipe wrench, hold elbow (B).

Using 1 inch deep style socket, remove stoplight switch (C).

Using plug, plug elbow (B) to prevent excessive loss of brake fluid.

CLEANING AND INSPECTION:

Cleaning agent specified is flammable.

Use only in well ventilated areas.

Keep away from flames, sparks, or heat, Do not smoke while using. Prevent

contact with eyes, mouth, and/or skin.

cleaning procedures.

1.

Using rags and drycleaning solvent, clean all

2.

Inspect elbow (B) for worn threads. Replace

3.

Inspect electrical connector

if unserviceable.

Go on to Sheet 3

Wear rubber gloves when performing

parts before installation.

if unserviceable.

D) and lead in wires for cracks and worn spots. Replace

TA249421

13-32