TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 681 of 1060

TM 5-5420-202-20-3

BRAKE PRESSURE GAGE, TUBE ASSEMBLY, REDUCER, AND GASKET REPLACEMENT

(Sheet 6 of 7)

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

Using fingers, install gasket (J) to reducer

(K).

Using 3/4 inch wrench, install reducer (K) to

master cylinder (L).

Using 9/16 inch wrench, install tube

connecting nut (M) and brake tube assembly

(H) to reducer (K).

Using fingers, remove filler cap (N) from

master cylinder (L).

Using funnel, fill master cylinder with brake

fluid to 1/4 inch from top of opening.

Using 1-1/8 inch socket, install filler

cap (N) to master cylinder (L).

Using hands, place rags or container

under line connecting nut (G) to catch

brake fluid during line bleeding procedure.

Depress brake pedal until brake fluid appears running clear and free of bubbles

nut (G).

at line

Using 9/16 inch wrench, tighten nut (G) while holding elbow (B) with 1/2 inch wrench.

Using 1-1/8 inch socket, remove filler cap (N).

Fill master cylinder with brake fluid to 1/4 inch from top of opening and install filler

cap (N).

Go on to Sheet 7

13-40