TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 689 of 1060

TM 5-5420-202-20-3

BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 7)

REMOVAL:

1.

Place rags under hose assembly (A) to absorb brake fluid.

2.

Using hand, turn brake quick-disconnect (B) off coupling half (C).

3.

Using adjustable wrench to hold elbow (D) and 11/16 inch wrench on nut of hose assembly

(A), disconnect nut.

4.

Using adjustable wrench to hold elbow

(D) and 11/16 inch wrench on nut of

tube assembly (E), disconnect nut and

remove elbow.

NOTE

Insert plastic plug in nut of tube

assembly (E).

5.

Using 11/16 inch wrench on nut of hose

assembly (A) at tee (F), disconnect nut

and remove hose assembly (A).

NOTE

If hose assembly (A)

insert plastic plugs

is not defective,

in end fittings.

6.

Using adjustable wrench to hold tee (F) and 11/16 inch socket on cap (G), remove cap.

7.

Using 13/16 inch wrench to hold top of disconnect (B) and 11/16 inch wrench on nut of

tee (F), remove tee.

Go on to Sheet 3

13-48

Change 6

TA249434