TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 723 of 1060

TM 5-5420-202-20-3

BRAKES ADJUSTMENT (Sheet 5 of 8)

9.

10.

Using

worm

Fully

1 inch wrench, install brake adjusting

cap (D).

apply brakes (TM 5-5420-202-10).

14.

15.

Using 1 inch wrench, remove bra

worm cap (D).

Using 15/16 inch wrench, loosen

(E).

11.

Check whether index line (B) marked

A and index mark (C) are lined up.

12.

If index line (B) marked A and index

mark (C) are lined up within 1/64 inch,

brakes are adjusted. Release brakes

and go to step 24.

13.

If index line (B) marked A and index

mark (C) are not lined up within 1/64

inch, release brakes and go to step 14.

Fully apply brakes (TM 5-5420-202-10).

If index line (B) marked A moves past

index mark (C), brake is too loose.

TA249466

Go on to Sheet 6

13-82