TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 713 of 1060

TM 5-5420-202-20-3

BRAKE CONTROL HOUSING REPAIR (Sheet 9 of 14)

9.

10.

11.

12.

Place new packings (L) on three

Place one shim (N) on each bolt

any shims added in step 6.

bolts (M) and insert bolts in housing assembly (C).

(M) (on back side of brake housing (C)) in addition to

Carefully position housing assembly (C) on transmission and start each bolt (M). Tighten

finger tight.

Place a flat washer and lockwasher (P) and nut (O) on each of two studs. Tighten finger

tight.

13.

14.

15.

16.

With housing assembly (C) firmly positioned, insert as many shims (H) as necessary to

fill gap between brake housing and spacer nut (E).

Insert bolt (R) (no packing under head) and tighten finger tight.

Using torque wrench, extension, and 9/16 inch socket, tighten two nuts (Q) to 20-25 lb-

ft (27-34 N.m).

Using torque wrench, extension and 15/16 inch socket, tighten three bolts (M) to 55-60

lb-ft (74-81 N.m). Tighten bolt (R) to 20-25 lb-ft (27-34 N.m).

Go on to Sheet 10

13-72