TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 710 of 1060

TM 5-5420-202-20-3

BRAKE CONTROL HOUSING REPAIR (Sheet 6 of 14)

22.

Using 15/16 inch wrench, remove plug

(AN).

23.

Using 9/16 inch socket with extension,

remove two nuts, lockwashers, and flat

washers (AP).

NOTE

24.

25.

26.

27.

28.

29.

30.

Shims are located between

housing assembly (AL) and

transmission on bolts (AQ

and AR), be careful when

removing control housing so as

not to lose shims.

Using 15/16 inch socket and extension,

remove three bolts and packings (AQ)

(under head) and bolt (AR). Throw packings

away.

Remove housing assembly (AL)

(AS).

Remove two packings (AT) and

(AU). Throw packings away.

and shims

shims

Using 9/16 inch deep well socket, remove

two studs (AV).

Using 3/4 inch socket, remove four spacer

nuts (AW).

Remove gasket (AX). Throw gasket

away.

Remove stud (AY) and eight studs (AZ).

Go on to Sheet 7

TA249453

13-69