TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 707 of 1060

TM 5-5420-202-20-3

BRAKE CONTROL

HOUSING REPAIR (Sheet 3 of 14)

4.

Using pliers, remove cotter pin (C).

5.

6.

7.

8.

9.

10.

11.

Remove pin (D) by pulling out. Remove

push rod (E).

Using pliers, pull pin (F) from housing

clevis (G).

Using pliers, remove cotter pin (H).

Using two 9/16 inch wrenches, remove

two nuts (J) by removing lower nut first

while holding upper one.

Move lever assembly (K) clear of control

assembly and remove two washers (L)

and spring (M).

Using retaining ring pliers, remove snap

ring (N).

Slide lever (P) off shaft (Q) and remove

lever (P) and lever assembly (K) with

attached parts from control housing.

Go on to Sheet 4

13-66