TM 5-5420-202-20-3
BRAKE CONTROL HOUSING REPAIR (Sheet 5 of 14)
NOTE
If left control cable is to be removed, perform steps 17
and 18. For right control cable perform step 19.
17.
Using 7/16 inch socket, remove screw (AA), lockwasher (AB), and nut (AC) releasing
clamp (AD).
18.
Using 3/4 inch socket and extension, remove nut (AE) and washer (AF) releasing clamp
(AG).
19.
Using 3/4 inch socket, remove two screws (AH) and washers (AJ) releasing clamps (AK).
20.
Pull control assembly (W) from housing assembly (AL).
21.
Using 9/16 inch wrench on flats of control assembly (W), use 15/16 inch wrench and remove
nut (AM).
Go on to Sheet 6
TA249452
13-68