TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 733 of 1060

13-92

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY (ONE PIECE OR FRONT SECTION) AND LINKAGE REPLACEMENT

(Sheet 3 of 17)

4.

5.

6.

7.

8.

9.

10.

11.

12.

Remove lever (C), spring pin (K), straight

pin (L), rod end connector (M), and nut

(N) as a unit.

Using 7/16 inch wrench, hold nut (N),

use pliers and remove straight pin (L)

from rod end connector (M).

Using 7/16 inch wrench, remove nut

(N) from rod end connector (M).

Using hammer and punch, drive out

spring pin (K) from lever (C). Throw

spring pin (K) away.

Using 9/16 inch wrench, hold nut (P),

use 8 inch adjustable wrench to remove

clevis (D) from control assembly (Q).

Using 9/16 inch wrench, remove nut

(P) from control assembly (Q). Discard nut (P).

Using 15/16 inch wrench, remove nut

(R) and lockwasher (S) from control

assembly (Q).

Pull control assembly (Q) through support

bracket (T).

Using 15/16 inch wrench, remove lock-

washer (U) and nut (V) from control

assembly (Q).

Go on to Sheet 4