TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 740 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY (ONE PIECE OR FRONT SECTION) AND LINKAGE REPLACEMENT

(Sheet 10 of 17)

3.

4.

5.

6.

With one person inside compartment at commander’s position pulling wire extending

from bulkhead, second person carefully threads control assembly (A) through tube (C)

located behind fuel tank until control assembly (A) end is visible at bulkhead (D) inside

compartment.

Continue to pull control assembly (A)

through bulkhead (D) until black grease

pencil reference mark is at bulkhead

wall location.

Position new split bushing (E) over control

assembly (A) with sealing compound.

Allow 20 minutes to dry, then put bushing

(E) into bulkhead (D).

Slide retainer (F) onto control assembly (A).

Using screwdriver, install retainer (F) to

Go on to Sheet 11

TA249483

13-99