TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 749 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY (ENGINE COMPARTMENT) REPLACEMENT (Sheet 2 of 15)

REMOVAL:

NOTE

Replacement of left and right control assembly is the same,

except for location of clamps and routing of cable assemblies.

1.

2.

3.

4.

5.

6.

Using 7/16 inch socket and 7/16 inch wrench, remove screw (A), washer (B), and nut

(C) holding clamp (D) to bracket (E).

Using flat-tip screwdriver to pry open, remove clamp (D) from control assembly (F).

Using 3/4 inch socket with 10 inch extension, remove nut (G) and washer (H) from stud

(J).

Remove bracket (E).

Using 3/4 inch socket, 10 inch extension, and universal joint remove nut (K) and washer

(L).

Using flat-tip screwdriver to pry open, remove clamp (M) from stud (N) and control

assembly (F).

Go on to Sheet 3

13-108

TA249492