TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 755 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY (ENGINE COMPARTMENT) REPLACEMENT (Sheet 8 of 15)

38.

Remove control assemblies (F and S).

39.

Using 9/16 inch wrench on flats (AT

and BE) of control assemblies (F and

S), use 15/16 inch wrench and remove

nuts (BK).

INSTALLATION:

1.

Using 9/16 inch wrench on flats (A and B) of

control assemblies (C and D), install both

nuts (E) at ends of control assemblies (C and

D) with cotter pin holes in threaded section.

Be sure nuts (E) are threaded all the way

onto threaded section.

TA249498

13-114