TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 761 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY (ENGINE COMPARTMENT) REPLACEMENT (Sheet 14 of 15)

35.

Using 3/4 inch socket, install both spacer nuts (AP) to studs (AQ). Using torque wrench,

tighten nuts (AP) to 54-59 lb-ft (72-80 N-m).

36.

Using screwdriver to pry open, position clamps (AR) on control assembly (C).

37.

Install screws (AS) and washers (AT) to secure clamps (AR) Using 3/4 inch socket, tighten

screws (AS).

38.

Adjust clamps (AR) to maintain a minimum of 3/4 inch clearance between control assembly

and turbocharger.

Go on to Sheet 15

13-120

TA249504