TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 764 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (REAR ONLY OF TWO-PIECE) (Sheet 2 of 6)

REMOVAL:

1.

At flats, use an adjustable wrench to hold control assembly (A), use 7/8 inch wrench

to loosen disconnect nut (B) on control assembly (C).

2.

With shift lever in P (park) position, manually move bellcrank at top of transmission

to the N (neutral) position (turn clockwise).

NOTE

This will force the two control assemblies (A and C)

to open up at the disconnect point.

3.

Manually disconnect the inner pushrods of the control assemblies (A and C).

4.

Using 7/16 inch wrench, remove screw (D), washer (E), and clamp (F) securing control

assembly (C) to the boss on top of transmission.

TA249507

13-123