TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 773 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CABLE ADJUSTMENT (Sheet 1 of 4)

TOOLS:

15/16 in. open end wrench (2 required)

Ratchet with 1/2 in. drive

Slip joint pliers

6 in. ruler

Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N=m)

Adapter socket, 3/8 in. to 1/2 in. drive

15/16 in. crowfoot attachment with 1/2 in. drive

SUPPLIES:

Cotter pins

Pencil (Item 71, Appendix D)

Pin (1/8 in. diameter welding rod, 4 in. long)

Paper (Item 72, Appendix D)

REFERENCE:

PRELIMINARY

TM 5-5420-202-10

PROCEDURES:

Remove transmission shroud (page 9-2)

Block vehicle tracks (TM 5-5420-202-10)

CABLE ADJUSTMENT:

1.

Set transmission shift lever to P (park) position (TM 5-5420-202-10).

2.

Using pliers, remove cotter pin (A) and pin (B) holding brake cable clevis (C) to parking

brake lever (D).

Go on to Sheet 2

13-132