TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 774 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CABLE ADJUSTMENT (Sheet 2 of 4)

3.

4.

Using pliers, remove clip (E) and pin (F) holding

controls bracket (J).

Rotate bellcrank (H) to aline holes in

bellcrank (H) with hole in brake controls

bracket (J). Insert 1/8 inch pin (K) through

bellcrank (H) and bracket (J).

NOTE

Pin (K) must slide up and down

freely while performing the

remaining adjustments.

brake cable (G) to belhcrank (H) at brake

5.

Push parking brake cable (G) inward until it stops.

6.

Check forward end of cable at driver’s compartment for free movement.

Go on to Sheet 3

TA249517

13-133