TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 777 of 1060

TM 5-5420-202-20-3

13-136

Ratchet with 1/2

in.

drive

7/16 in. socket with 1/2 in. drive

Pry bar

Slip joint pliers

FABRICATED TOOLS:

Gage block, 3/16 inch

Gage block, 15/16 inch

Gage block, 1-1/8 inch

SUPPLIES:

Locating pin (1/8 in. drill or welding

Cotter pin (4 required)

Gasket (2 required)

Lockwasher (8 required)

rod 4 in. long)

PRELIMINARY PROCEDURES: Remove powerplant (page 5-2)

NOTE

If your vehicle is equipped with the two-piece control assembly, it must

be separated at the disconnect.

ADJUSTMENT:

1.

Using socket, remove eight nuts and lockwashers (A) securing cover and gasket (B) t

O

brake housing assembly (C). Remove cover and gasket.

Throw gaskets and Lockwashers

away.

TA249520