TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 769 of 1060

TM 5-5420-202-20-3

BELLCRANK REPLACEMENT (Sheet 1 of 4)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

Installation

13-128

13-130

TOOLS: 9/16 in. combination box and open end wrench

Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N“m)

Long round nose pliers (needle nose)

Bench vise

Vise jaw caps

1 lb. hammer

Punch drive pin 3/8 in. dia.

9/16 in. socket with 1/2 in. drive

SUPPLIES:

Bushing

PRELIMINARY PROCEDURES:

Block tracks (TM 5-5420-202-10)

Place transmission in N (neutral) (TM 5-5420-202-10)

Remove transmission shroud (page 9-2).

1.

Using pliers, remove cotter pin (A) and

flat washer (B) from pin (C).

2.

Remove pin (C) from bellcrank (D).

Go on to Sheet 2

13-128

TA249512