TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 765 of 1060

TM 5-5420-202-20-3

PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (REAR ONLY OF TWO-PIECE) (Sheet 3 of 6)

5.

At transmission bellcrank assembly

using pliers, remove clip (G) and

pin (H) securing connector (J) to

bellcrank (K).

6.

Using a 9/16 inch socket and extension,

remove two screws (L), washers (M)

and bracket (N) from bracket assembly (P).

7.

8.

9.

10.

Using 9/16 inch wrench on nut (Q) and

adjustable wrench, remove connector (J)

and nut (Q).

Us an adjustable wrench to hold support

bracket (N). Using a 15/16 inch wrench,

remove nut (R) and preformed packing (S).

Throw away packing (S).

Using a 15/16 inch wrench, remove nut (T)

and lockwasher (U) from control assembly (C).

Remove support bracket (N) and lockwasher (V).

Using a 15/16 inch wrench, remove nut

(W) from control assembly (C).

TA249508

13-124