TM 5-5420-202-20-3
PARKING BRAKE CONTROL ASSEMBLY (ENGINE COMPARTMENT) REPLACEMENT (Sheet 1 of 15)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
13-107
Installation
13-114
TOOLS:
9/16 in. socket with 1/2 in. drive
SUPPLIES:
Screwdriver, flat-tip, 1/4 in. tip
Screwdriver, flat-tip, 3/8 in. tip
7/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
Universal joint with 1/2 in. drive
Ratchet with 1/2 in. drive
10 in. extension with 1/2 in. drive
7 in. long nosed pliers
Torque wrench, 0-175 lb-ft with
1/2 in. drive
7/16 in. open end wrench
9/16 in. open end wrench (2)
8 in. adjustable wrench
15/16 in. open end wrench (2)
7/8 in. open end wrench
6 in. scale
9/16 in. crowfoot with 1/2 in. drive
PRELIMINARY
Gasket
Preformed packings
Packing with retainer
Grease pencil
Paper (Item 72, Appendix D)
Go on to Sheet
PROCEDURES:
Block tracks to prevent vehicle movement
(TM 5-5420-202-10)
Place shift lever at N (neutral position)
(TM 5-5420-202-10)
Remove powerplant (page 5-2)
2
Change 4
13-107