TM-5-5420-202-20-3

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 3 OF 4

OCTOBER 1985

TM-5-5420-202-20-3 - Page 978 of 1060

TM 5-5420-202-20-3

EXHAUST DOORS REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

1.

Install 22 lockwashers (A) and screws (B) to

secure two deflectors (C) mounted on right

side only exhaust door (D). Using 9/16 inch

socket with extension, tighten screws (A).

2.

Using sling with hoist, lift door to

mounting position at rear of hull.

3.

Using assistance from other technicians,

mount door to two hinges.

4.

5.

6.

7.

8.

9.

10.

Using pliers, spread each side of cotter

pin (G) so it cannot be removed.

Remove sling.

Repeat steps 2 through 8 for opposite

sick of vehicle.

Close exhaust doors (left door first).

Go on to Sheet 4

Install flat washers (E), use as many

as necessary, to aline door screw holes

with hull mating holes.

Using ball peen hammer, drive two headed

straight pins (F) into two door hinges.

Using ball peen hammer with pliers,

install two new cotter pins (G) through

straight pins (F).

16-19