TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 154 of 534

TM 5-5420-202-20-4

TACHOMETER REAR FLEXIBLE SHAFT REPLACEMENT (Sheet 6 of 6)

4.

5.

6.

7.

8.

12.

13.

14.

15.

16.

17.

18.

NOTE

If grommet (B) was not removed from bulk-

head, go to step 6.

Slide grommet (B) over shaft (A).

Apply adhesive to grommet (B).

Install grommet (B) in position in bulkhead

(c).

Slide clamp (D) over shaft (A) in position

on grommet (B).

Install rubber bushing (E) in position.

9.

Locate tachometer shaft adapter (F) under

driver’s compartment floor plate (G).

10.

Using fingers, connect shaft (A) to shaft

adapter (F).

11.

Using screwdriver, tighten clamp (D) on

grommet (B).

Using wrench, tighten shaft (A) to tacho-

meter shaft adapter (F).

Position floor plate (G) with holes alined.

Using screwdriver, install six screws (H).

Install powerplant (page 5-14).

Start engine (

TM

5-5420-202-10).

Make sure tachometer works.

Install engine upper access cover (page

17-12).

End of Task

TA248655

19-30