TM 5-5420-202-20-4
FIXED FIRE EXTINGUISHER CONTROL VALVE REPLACEMENT (Sheet 6 of 14)
15.
Using 3/32 inch allen wrench, remove
two screws (V) from retainer (W).
16.
Remove sheave (X) and retainer (W)
from housing (U).
17.
Remove cable (Y) from housing (U)
through hole in plug (Z).
18.
Using adjustable wrench, remove plug
(Z) from housing (U).
11.
Using diagonal cut ting pliers, remove
lead seal (P).
12.
Using fingers, remove wire from three
screws (Q) and pin (R).
13.
Using screwdriver, remove three screws
(Q) and washers (S) securing cover (T)
to housing (U).
14.
Remove cover (T) from housing (U).
Go on to Sheet 7
TA248665
20-7