TM 5-5420-202-20-4
FIXED FIRE EXTINGUISHER CONTROL VALVE REPLACEMENT (Sheet 9 of 14)
10.
Install pin (J) through handle (K) and
cover (L).
11.
Using 1/16 inch rod, turn cover shaft
(M) until arrow points at SET arrow (N)
on cover (L).
13.
Using screwdriver, install three screws
(P) and washers (Q) securing cover (L) to
housing (D).
14.
Using rod, reset valve by turning shaft
(M) counterclockwise to aline arrow on
shaft (M) with SET arrow (N) on cover.
Go on to Sheet 10
12.
Place cover (L) on housing (D).
TA248668
20-10