TM 5-6420-202-20-4
FIXED FIRE EXTINGUISHER INTERIOR RELEASE MECHANISM CONTROL ASSEMBLY
REPLACEMENT (Sheet 4 of 7)
9.
Using 9/16 inch wrench, remove two
remaining nuts (P) from two control
assemblies (F).
10.
Using 3/8 inch wrench on flats (Q) of
two control assemblies (F), remove
two control assemblies (F) from release
mechanism (R).
INSPECTION:
1.
Check all parts for signs of wear or
damage.
2.
Replace all worn or damaged parts.
Go on to Sheet 5
TA248677
20-19