TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 186 of 534

TM 5-5420-202-20-4

INTERIOR RELEASE MECHANISM REPAIR (Sheet 1 of 11)

PROCEDURE INDEX

PROCEDURE

PAGE

Disassembly

20-28

Cleaning and Inspection

20-32

Assembly

20-32

TOOLS: Pliers

5/16 in. combination box and open end wrench

Flat-tip screwdriver

Long round nose pliers

Ball peen hammer

3/32 in. drive punch

3/16 in. drive punch

Vise

SUPPLIES:

Spring pins (five)

(needle nose)

PRELIMINARY

Position

Dry cleaning solvent (Item 55, Appendix

Cleaning fluid (Item 36, Appendix D)

Cooking stove

Water

Gloves (Item 69, Appendix D)

Cotter pins

Goggles (Item 70, Appendix D)

DIS

1.

D)

PROCEDURES:

Remove interior release mechanism and mounting bracket

(page 20-23).

NOTE

interior release mechanism in vise as

necessary to accomplish disassembly and

assembly.

ASSEMBLY:

Using wrench, remove two screws

(A) holding bracket (B) to release

mechanism (C). Remove bracket

(B), fuel shutoff switch (D), and

instruction plate (E) from release

mechanism (C).

Go on to Sheet 2

20-28

TA248686