TM 5-5420-202-20-4
INTERIOR RELEASE MECHANISM REPAIR (Sheet 7 of 11)
7.
Aline pin hole of cam (J) with pin hole
of lever pin (F).
8.
Using hammer and 3/16 inch punch, tap
new short spring pin (L) into cam (J) and
lever pin (F).
9.
Aline pin hole of lever (K) with pin hole
of lever pin (F).
10.
Using hammer and punch, tap new long
spring pin (M) into lever
(K)
and lever
pin (F).
11.
Install spacer (N), pawl (P), bushing (Q),
and straight pin (R) onto lever (H).
Go on to Sheet 8
TA248692
20-34