TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 199 of 534

TM 5-5420-202-20-4

EXTERIOR RELEASE HANDLE BODY ASSEMBLY REPLACEMENT (Sheet 3 of 4)

NOTE

These instructions describe

of either body assembly.

INSTALLATION:

installation

1.

Thread cable (A) into socket (B).

2.

Lay cable (A) in groove around plug

(C). Allow a minimum of 1/8 inch of

cable extending beyond plug (C).

4.

Install fastener assembly (D) into body

assembly (E).

5.

Using 1/2 inch wrench, tighten fastener

assembly (D) into body assembly (E).

3.

Using pliers, seat plug (C) into socket

(B).

Go on

to Sheet 4

TA248699

20-41