TM 5-5420-202-20-4
EXTERIOR RELEASE HANDLE BODY ASSEMBLY REPLACEMENT (Sheet 4 of 4)
6.
7.
8.
9.
Squeeze
spring
clips on body assembIy (E)
and insert body assembly (E) into bracket
(F).
Install antipilferage seal (G) as shown. Position
seal (G). Wrap wire from seal (G) around
coupling (H), cross over body assembly
handle (E), and thread end of wire through
seal (G).
Using slip joint pliers, crimp seal (G)
onto wire.
Replace control valves (page 20-14).
End
of
Task
20-42 Change 4