TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 201 of 534

TM 5-5420-202-20-4

EXTERIOR RELEASE HANDLE BODY ASSEMBLY REPAIR (Sheet 1 of 1)

TOOLS:

Ball peen hammer

1/8 in. flat-tip screwdriver (pocket screwdriver)

1/2 inch drive punch

SUPPLIES:

Drive screws (2 required)

PRELIMINARY PROCEDURE:

Remove release handle body assembly (page 20-39).

DISASSEMBLY:

1.

Using screwdriver, pry two drive screws (A) from body (B).

2.

Remove two clip springs (C).

3.

Replace defective parts as required.

ASSEMBLY:

1.

Place body (B) on flat surface.

2.

Position clip springs (C) onto body (B).

3.

Using hammer and punch, tap new drive screws (A) into body (B).

4.

Install release handle body assembly (page 20-41).

End of Task

TA248701

20-43