TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 170 of 534

TM 5-5420-202-20-4

FIXED FIRE EXTINGUISHER CONTROL VALVE REPLACEMENT (Sheet 11 of 14)

20.

Using adjustable wrench, install plug

(U) in housing (V).

21.

Push cable (W) through plug (U) and

around sheave (X).

22.

Lay cable (W) in retainer (Y).

23.

Extend cable (W) full length of retainer

(Y) and no further.

24.

Coat threads of two screws (Z) with sealant.

25.

Using 3/32 inch allen wrench, install two screws (Z) securing cable (W) in retainer (Y).

26.

Place sheave (X), cable (W), and retainer (Y) in housing (V) in approximately the position

shown. Cable end of retainer (Y) must be against pin on sheave (X).

27.

Using spring scale, pull against cable (W) with about 150 pounds of force to make sure

cable (W) is secured by screws (Z).

Go on to Sheet 12

20-12

TA246670