TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 434 of 534

TM 5-5420-202-20-4

GENERAL MAINTENANCE (Sheet 17 of 33)

Installation of New Studs (Sheet 1 of 1)

TOOLS:

Wrench, torque

Screw threading set

Combination box and open end wrench (2 required)

Socket

3.

Using socket, install new stud (D) into

hole (B).

End of Task

C-18

1.

Using bottoming tap (A), clean out

threads in hole (B).

2.

Using two wrenches, install and jam

two nuts (C) onto end of new stud (D).

4.

Using

(D) to

torque wrench, tighten new stud

required value (refer to specific

maintenance procedure).

5.

Using two wrenches, remove two nuts

(C) from new stud (D).

TA248915