TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 438 of 534

TM 5-5420-202-20-4

GENERAL MAINTENANCE (Sheet 21 of 33)

Spring Pin Installation (Sheet 1 of 1)

TOOLS:

Ball peen hammer

Hand oiler

SUPPLIES:

Lubricating oil (Item 44, Appendix D)

Hard wood block

1.

Using oil, lightly lube pin (A).

2.

Putting spring pin (A) into hole (B),

keep it as straight as possible.

3.

Using hammer, tap pin

with surface (C).

NOTE

(A) until flush

If structure is not sturdy, support

opposite end of hole with wooden

block (D) while tapping pin (A)

into place.

End of Task

C-22