TM 5-5420-202-20-4
GENERAL MAINTENANCE (Sheet 24 of 33)
Wheel Bearing Packer Lubrication of Bearings (Sheet 2 of 3)
Go on to Sheet 3
6.
7.
8.
9.
Screw cap (C) onto center post (D) to
hold bearing (E) in position.
Using grease gun, pump grease into
fitting (G) until resistance is felt.
Unscrew cap (C) from center post (D).
Take insert (E) from base (B).
10.
Remove bearing (F) from base (B).
TA248922
C-25