TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 449 of 534

TM 5-5420-202-20-4

GENERAL MAINTENANCE (Sheet 32 of 33)

External Snap Ring Single Wire Safety Wiring (Sheet 1 of 1)

TOOLS:

Slip joint pliers

Diagonal cutting pliers

SUPPLIES:

Lock wire

NOTE

Do not safety wire internal snap rings.

1.

Using diagonal cutting pliers, cut piece of lock wire about 12 inches long.

4.

Using diagonal cutting pliers, cut wire

leaving a pigtail from 1/4 to 1/2 inch

long.

5.

Bend pigtail back under to prevent it

from becoming a snag.

End of Task

2.

Run wire through two holes in external

snap ring (A), keeping length of free

wire ends the same.

3.

Using slip joint pliers, twist wire at

least six times.

TA248928

C-33