TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 461 of 534
TM 5-5420-202-20-4
MATERIAL
STOCK
DESCRIPTION
FABRICATING REQUIREMENT
8.
GRIND OR FILE APPROXIMATELY 1/8”
OFF THE TWO INSIDE CORNERS OF THE
CLIPS AT EACH END, TO AID TOOL
ENGAGEMENT.
9.
WELD THREE GUIDE CLIPS TO EACH
SEMI CIRCULAR FLANGE PIECE.
NOTE
THE TWO CLIPS ON THE ENDS SHOULD BE ANGLED
OUT SLIGHTLY.
10.
WELD APPROXIMATELY 48” OF SMALL
LINK
C
H
A
IN
(WITH AN EYE AT THE
FREE END) TO THE CENTER CLIP.
Figure F-4. Final drive adapter hook-up tool (Sheet 2 of
2).
Change 4
F-5
Back to Top
