TM-5-5420-202-20-4
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4
OCTOBER 1985
TM-5-5420-202-20-4 - Page 57 of 534
TM 5-5420-202-20-4
REAR DRAIN VALVE REAR ROD, COUPLING, AND CLEVIS REPLACEMENT
(Sheet 4 of 6)
INSTALLATION:
1.
Install clevis jamnut (A) and clevis (B) on either end of rod (C).
2.
Adjust clevis (B) and clevis jamnut (A) until original length of threads can be measured
on rod (C) with clevis jamnut (A) finger tightened against clevis (B) (page 17-30, step 5).
3.
using 9/16 inch wrench, tighten clevis jam nut (A) against clevis (B), while holding clevis (B)
with pliers.
Go on to Sheet 5
MEASURE THREADS HERE
TA248562
17-31
Back to Top
